Characteristics of Craniofacial Morphology and Occlusion in Shwachman-Diamond Syndrome: A Case Report of a Japanese Sibling Pair.

Shwachman-Diamond syndrome (SDS) is a rare autosomal recessive disorder mainly caused by mutations in the Shwachman-Bodian-Diamond syndrome gene on chromosome 7q11. Although skeletal abnormalities are a feature of SDS, no reports have focused on the craniofacial morphology of patients with SDS. Moreover, the detailed dental characteristics of SDS remain unknown. In the present case report, we evaluated the craniofacial morphology and dental findings of two patients with SDS. A Japanese adolescent sibling pair with SDS had the chief complaint of excessive overjet. Cephalometric analysis revealed similar craniofacial morphology in both patients: skeletal class I malocclusion with a hypodivergent pattern and labial inclination of the maxillary and mandibular incisors. A panoramic photograph showed the tendency of delayed permanent tooth eruption and replacement in both patients. These cases suggest that malocclusion requiring orthodontic treatment might be a feature of patients with SDS.

Validation of Machine Learning Models for Craniofacial Growth Prediction.

This study identified the most accurate model for predicting longitudinal craniofacial growth in a Japanese population using statistical methods and machine learning. Longitudinal lateral cephalometric radiographs were collected from 59 children (27 boys and 32 girls) with no history of orthodontic treatment. Multiple regression analysis, least absolute shrinkage and selection operator, radial basis function network, multilayer perceptron, and gradient-boosted decision tree were used. The independent variables included 26 coordinated values of skeletal landmarks, 13 linear skeletal parameters, and 17 angular skeletal parameters in children ages 6 to 12 years. The dependent variables were the values of the 26 coordinated skeletal landmarks, 13 skeletal linear parameters, and 17 skeletal angular parameters at 13 years of age. The difference between the predicted and actual measured values was calculated using the root-mean-square error. The prediction model for craniofacial growth using the least absolute shrinkage and selection operator had the smallest average error for all values of skeletal landmarks, linear parameters, and angular parameters. The highest prediction accuracies when predicting skeletal linear and angular parameters for 13-year-olds were 97.87% and 94.45%, respectively. This model incorporates several independent variables and is useful for future orthodontic treatment because it can predict individual growth.

Identification of Candidate Genes of Familial Multiple Idiopathic Cervical Root Resorption.

INTRODUCTION: Multiple idiopathic cervical root resorption (MICRR) is a disease with an unknown etiology that causes invasive cervical root resorption in multiple teeth. Although previous MICRR genomic studies have identified candidate gene variants, the etiology of the condition remains poorly understood. In the present study, we investigated the genetic causality of MICRR to explore candidate variants. METHODS: Saliva samples from a family containing 2 affected and two unaffected subjects with the dominant transmission of MICRR were subjected to whole-exome sequencing. RESULTS: As a result, we identified novel candidate variants of 10 genes. Each variant was confirmed by Sanger sequencing. Among them, the American College of Medical Genetics and Genomics and the Association for Molecular Pathology (ACMG/AMP) guidelines classified doublecortin domain containing 1 (c.1099 C > T) and ß-defensin 114 (c.189 T > G) as "pathogenic," and solute carrier family 45 member 2 (c.152_153del) as "likely pathogenic." CONCLUSIONS: These results provide new insight to help clarify the pathogenesis of MICRR, and the variants could be applied for further investigation to understand invasive cervical root resorption.

Comparison of Mandibular Volume and Linear Measurements in Patients with Mandibular Asymmetry.

In patients with mandibular asymmetry, the volume of the mandible divided by the mandibular median plane is significantly larger on the non-deviated (N-Dev) side than on the deviated (Dev) side. However, it has been reported that there is no significant difference between the volumes of the N-Dev and Dev sides when the mandibular ramus and body are divided. The purpose of this study was to investigate which region is responsible for the volume difference between the N-Dev and Dev sides. Cone Beam Computed Tomography (CBCT) images of patients with mandibular asymmetry were analyzed by measuring the volume, and linear analysis of the mandibular body, ramus, and condyle on the N-Dev and Dev side was performed. In this study, CBCT images of 37 patients (8 Japanese, 16 Korean, and 13 Egyptian) aged ≥ 18 years with mandibular asymmetry (men: 20, women: 17) were used to evaluate mandibular asymmetry. In patients with mandibular asymmetry, the N-Dev side showed significantly larger values than the Dev side for both volume and linear condyle, ramus, and mandibular body measurements. These results do not differ according to sex or ethnicity. Therefore, it is suggested that the N-Dev side of mandibular asymmetry is large without any regional specificity in pathophysiology.

Comparison of Maxillofacial Morphology Between Modified Furlow's and Modified two-Flap Palatoplasty in Orofacial Clefts During the Primary Dentition Period.

OBJECTIVE: To assess the effect of two palatoplasty procedures, modified Furlow's palatoplasty (F procedure) and modified two-flap palatoplasty (T procedure), on the maxillofacial morphology of unilateral cleft lip and palate (UCLP) and bilateral cleft lip and palate (BCLP) during the primary dentition period. DESIGN: Retrospective cohort study. SETTING: Department of Orthodontics, School of Dentistry, Showa University. PARTICIPANTS: We enrolled 106 pediatric patients (63 boys, 43 girls; aged 4.43 ± 0.34 years) with non-syndromic orofacial clefts who underwent cheiloplasty and palatoplasty. INTERVENTIONS: Patients were divided into four groups according to cleft type (BCLP or UCLP) and palatoplasty procedure type (F or T procedure). MAIN OUTCOME MEASURES: Maxillofacial morphology was assessed by examining parameters on lateral cephalograms. RESULTS: Multiple comparisons revealed significant differences among N-A, N-ANS, and ANS-PNS distances and SNA and ANB angles among the groups. There were significant differences in N-A, N-ANS, ANS-PNS, SNA, and SNB among the UCLP and BCLP groups. The calculated effect sizes were all within 0.3-0.5. The statistical power was as follows: N-A, 86.41%; N-ANS, 79.77%; ANS-PNS, 97.49%; SNA, 96.88%; and ANB, 99.25%. CONCLUSIONS: Although UCLP and BCLP both exhibited differences in craniofacial distances and angles, the procedure type (either F or T procedure) had no significant effect on the maxillofacial morphology (as determined by lateral cephalograms). However, to rule out additional bias, patient-specific factors should be considered that may be affected by maxillofacial development when deciding surgical approaches.

Association of Mandibular Posterior Anatomic Limit with Skeletal Patterns and Root Morphology Using Three-Dimensional Cone Beam Computed Tomography Comprehensive Analysis.

This study aimed to clarify the relationship between the mandibular posterior anatomic limit (MPAL) and skeletal anteroposterior and vertical skeletal patterns, with consideration of factors that may be related. In total, 230 people were included: 49 Japanese, 122 Egyptian, and 59 Korean people. The MPAL was measured at 0, 2, 4, and 6 mm from the root furcation along the sagittal and cuspal lines at the distance from the distal root of the mandibular right second molar to the mandibular cortex of the lingual bone. Eight different MPALs were evaluated using multiple regression analysis with explanatory variables for anteroposterior and vertical skeletal patterns and qualitative variables for age, sex, population, the presence of third molars, number of roots, presence of C-shaped roots, and Angle malocclusion classification. The MPAL was significantly larger as the mandibular plane angle decreased. The MPAL near the root apex was significantly larger as the A-nasion-point B angle increased, and the MPAL near the root apex measured at the cuspal line was significantly larger for C-type roots. The present study showed that a C-shaped root affected the MPAL in addition to the anteroposterior and vertical skeletal patterns.

Primary failure of tooth eruption: Etiology and management.

Primary failure of eruption (PFE) is a rare disorder defined as incomplete tooth eruption despite the presence of a clear eruption pathway. PFE is known to be caused by rare variants in the parathyroid hormone 1 receptor gene (PTH1R). Although several PTH1R variants have been reported, the etiology of PFE remains unclear. However, important studies that help elucidate the pathology of PFE have recently been published. The purpose of this review is to summarize current treatment options, clinical symptoms or phenotypes for diagnosis, genetic information including solid evidence in mouse disease models and disease-specific induced pluripotent stem cells, thus approaching the etiology of PFE from the perspective of the latest research.

Effects of root contact length on the failure rate of anchor screw.

PURPOSE: This study aimed to evaluate the causal relationship between root contact and root contact length of orthodontic miniscrew implants (miniscrews), and assessed factors for implant failure through cone-beam computed tomography (CBCT) images. METHODS: First, a logistic regression analysis was performed to investigate the most relevant factors for implant failure based on sex, age, vertical skeletal pattern, horizontal skeletal pattern, and presence of root contact in 59 patients (mean age: 21.2, age range: 13-54 years) who had miniscrew implants. Next, 38 miniscrews (1.6 mm in diameter and 8.0 mm in length) with root contact were investigated in the patients. Root contact length was measured using CBCT taken after miniscrew implant placement. RESULTS: The results showed that root contact was the most critical risk factor for failure of miniscrew implants in patients. Logistic regression analysis showed that the risk approximately doubled as the root contact length increased by 1.0 mm. CONCLUSION: Avoiding proximity to the root during miniscrew implant placement is essential to prevent implant failure.

Prevalence of saliva immunoglobulin A antibodies reactive with severe acute respiratory syndrome coronavirus 2 among Japanese people unexposed to the virus.

While the COVID-19 pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) poses a threat to public health as the number of cases and COVID-19-related deaths are increasing worldwide, the incidence of the virus infection is extremely low in Japan compared with many other countries. To explain this uncommon phenomenon, we investigated the prevalence of naturally occurring ("natural") antibodies, focusing on those of the secretory immunoglobulin A (sIgA) form, reactive with SARS-CoV-2 among Japanese people. One hundred and eighty healthy Japanese volunteers of a wide range of age who had been considered to be unexposed to SARS-CoV-2 participated in this study. Saliva samples and blood samples were collected from all of the 180 participants and 139 adults (aged ≥ 20 years) included therein, respectively. The determination of saliva IgA antibodies, mostly comprising sIgA antibodies, as well as serum IgA and immunoglobulin G antibodies, reactive with the receptor binding domain of the SARS-CoV-2 spike-1 subunit proteins was conducted using an enzyme-linked immunosorbent assay. The major findings were that 52.78% (95% confidence interval, 45.21%-60.25%) of the individuals who had not been exposed to SARS-CoV-2 were positive for saliva IgA antibodies with a wide range of levels between 0.002 and 3.272 ng/mL, and that there may be a negative trend in positivity for the antibodies according to age. As we had expected, a frequent occurrence of assumable "natural" sIgA antibodies reactive with SARS-CoV-2 among the studied Japanese participant population was observed.

Methods in Genetic Analysis for Evaluation Mandibular Shape and Size Variations in Human Mandible.

ABSTRACT: The human mandible has been investigated from both clinical and evolutionary perspectives. Recent advances in genome science have identified the genetic regulation of human mandibular shape and size. Identification of genes that regulate mandibular shape and size would not only enhance our understanding of the mechanisms of mandibular growth and development but also help define a strategy to prevent mandibular dysplasia. This review provides a comprehensive summary of why and how the mandible was evaluated in the human mandible genome study. The variation in human mandibular shape and size has been progressively clarified, not only by focusing on the mandible alone but also by using extremely diverse approaches. The methods of data acquisition for evaluating human mandibular shape and size variation are well established. Furthermore, this review explains how to proceed with future research.

Comparison of cerebral cortex activation induced by tactile stimulation between natural teeth and implants.

BACKGROUND: The purpose of this study was to assess the cortical-level sensory differences between natural teeth with a periodontal membrane and dental implants. MATERIAL AND METHODS: We used functional near-infrared spectroscopy (fNIRS) to measure brain activity in the cerebral cortex of 12 patients who had both natural teeth and dental implants in the lower molar region. Painless vibratory tactile stimulation was performed on both the natural teeth and the dental implants. RESULTS: Activation was seen in the somatosensory cortex during stimulation of both natural teeth and dental implants. A comparison of cortical activation showed no significant differences between natural teeth and dental implants. CONCLUSIONS: These results indicate the possible existence of sensory input to the cerebral cortex via dental implants as well as natural teeth, and thus suggest that may not only the periodontal membrane be involved in the signaling pathway. The data from this experiment may help us for understanding the neural mechanisms underlying natural teeth and dental implants. Key words:fNIRS, natural teeth, implants, brain activity, somatosensory cortex.

Three-dimensional evaluation of mandibular volume in patients with cleft lip and palate during the deciduous dentition period.

OBJECTIVES: To examine the relationship between mandibular volume and craniofacial morphology in patients with cleft lip and palate using cone beam computed tomography (CBCT) and to compare these findings with control (noncleft) patients undergoing CBCT for other purposes during the deciduous dentition period. MATERIALS AND METHODS: Eighty-four patients were categorized into the unilateral cleft lip and alveolus (UCLA) group (n = 25; mean age, 4.60 ± 0.40 years), unilateral cleft lip and palate (UCLP) group (n = 23; mean age, 4.52 ± 0.39 years), bilateral cleft lip and palate (BCLP) group (n = 22; mean age, 4.54 ± 0.37 years), and control group without cleft (n = 14; mean age, 5.19 ± 0.52 years). Mandibular volume and craniofacial cephalometric measurements were obtained using CBCT. All measurements were assessed by analysis of covariance (ANCOVA) using Bonferroni post hoc pairwise comparison tests. RESULTS: ANCOVA revealed no statistically significant differences in mandibular volume among the groups. SNA° and ANB° were significantly larger in the UCLA and BCLP groups than in the control group. SN-MP° was smallest in the UCLA group. Co-A in the UCLP group was shorter than in the UCLA and BCLP groups. Go-Gn was shortest in the UCLP and BCLP groups compared with the control group. CONCLUSIONS: Three-dimensional evaluation of craniofacial morphology using CBCT can provide valuable information on malocclusion and other dentoskeletal problems among patients with CLP.

Three-dimensional assessment of the pharyngeal airway in Japanese preschoolers with orofacial clefts.

OBJECTIVES/HYPOTHESIS: Individuals with orofacial clefts often experience respiratory problems because of nasopharyngeal abnormalities. Pharyngeal airway morphology is thought to differ among the various cleft types. We measured three-dimensional (3D) airway volume using cone-beam computed tomography (CBCT) analysis to evaluate and compare pharyngeal airways in Japanese preschoolers with and without orofacial clefts. STUDY DESIGN: Retrospective case-control study. METHODS: We enrolled 83 subjects (37 boys, 46 girls; mean age = 4.66 ± 0.56 years) with nonsyndromic orofacial clefts and 16 noncleft healthy subjects (seven boys, nine girls; mean age = 5.30 ± 0.52 years) as controls. The subjects were divided into five groups. Four groups were based on the cleft type: isolated cleft palate, unilateral cleft lip and alveolus), unilateral cleft lip and palate, and bilateral cleft lip and palate. The fifth group included the noncleft controls. All subjects were examined with CBCT, and the 3D airway volume was measured. We analyzed group differences statistically using analysis of covariance with the Bonferroni post hoc pairwise comparison tests for the corrected means. RESULTS: Compared with the noncleft group, each cleft group exhibited significantly decreased total and nasal airway volumes and increased superior and inferior pharyngeal airway volumes. The differences were all statistically significant. CONCLUSIONS: Our findings suggest that anatomical differences exist in pharyngeal airway volumes among various cleft groups and in those without a cleft. LEVEL OF EVIDENCE: 3b Laryngoscope, 130:533-540, 2020.

A three-dimensional analysis of primary failure of eruption in humans and mice.

OBJECTIVES: Primary failure of eruption (PFE) is a genetic disorder exhibiting the cessation of tooth eruption. Loss-of-function mutations in parathyroid hormone (PTH)/parathyroid hormone-related peptide (PTHrP) receptor (PTH/PTHrP receptor, PPR) were reported as the underlying cause of this disorder in humans. We showed in a PFE mouse model that PTHrP-PPR signaling is responsible for normal dental follicle cell differentiation and tooth eruption. However, the mechanism underlying the eruption defect in PFE remains undefined. In this descriptive study, we aim to chronologically observe tooth eruption and root formation of mouse PFE molars through 3D microCT analyses. SETTING AND SAMPLE POPULATION: Two individuals with PFE were recruited at Showa University. A mouse PFE model was generated by deleting PPR specifically in PTHrP-expressing dental follicle and divided into three groups, PPRfl/fl ;R26RtdTomato/+ (Control), PTHrP-creER;PPRfl/+ ;R26RtdTomato/+ (cHet), and PTHrP-creER;PRRfl/fl ;R26RtdTomato/+ (cKO). MATERIALS AND METHODS: Images from human PFE subjects were acquired by CBCT. All groups of mouse samples were studied at postnatal days 14, 25, 91, and 182 after a tamoxifen pulse at P3, and superimposition of 3D microCT images among three groups was rendered. RESULTS: Mouse and human PFE molars exhibited a similar presentation in the 3D CT analyses. The quantitative analysis in mice demonstrated a statistically significant decrease in the eruption height of cKO first and second molars compared to other groups after postnatal day 25. Additionally, cKO molars demonstrated significantly shortened roots with dilacerations associated with the reduced interradicular bone height. CONCLUSIONS: Mouse PFE molars erupt at a much slower rate compared to normal molars, associated with shortened and dilacerated roots and defective interradicular bones.

Relationship between the maxillofacial skeletal pattern and the morphology of the mandibular symphysis: Structural equation modeling.

OBJECTIVE: The purpose of this study was to investigate the relationship between the facial skeletal patterns and the shape of the mandibular symphysis in adults with malocclusion by using a structural equation model (SEM). METHODS: Ninety adults who had malocclusion and had records of facial skeletal measurements performed using cone-beam computed tomography were selected for this study. The skeletal measurements were classified into three groups (vertical, anteroposterior, and transverse). Cross-sectional images of the mandibular symphysis were analyzed using generalized Procrustes and principal component (PC) analyses. A SEM was constructed after the factors were extracted via factor analysis. RESULTS: Two factors were extracted from the transverse, vertical, and anteroposterior skeletal measurements. Latent variables were extracted for each factor. PC1, PC2, and PC3 were selected to analyze the variations of the mandibular symphyseal shape. The SEM was constructed using the skeletal variables, PCs, and latent variables. The SEM showed that the vertical latent variable exerted the most influence on the mandibular symphyseal shape. CONCLUSIONS: The relationship between the skeletal pattern and the mandibular symphysis was analyzed using a SEM, which showed that the vertical facial skeletal pattern had the highest effect on the shape of the mandibular symphysis.

Analysis of the relationship between the morphology of the palate and facial skeletal patterns in Class III malocclusion using structural equation modelling.

INTRODUCTION: The present study investigated the relationship between facial skeletal patterns and morphology of the palate in adult patients with Class III malocclusion using structural equation modelling (SEM). SETTING AND SAMPLE POPULATION: One hundred cone beam computed tomography images of Class III adults were evaluated for skeletal measurements. MATERIALS AND METHODS: The skeletal measurements were classified into the vertical, anteroposterior and transverse group based on factor analysis. 3D scanning model of the maxilla was analysed by Generalized procrustes analysis (GPA) and principal component analysis (PCA). Structural equation modelling was used to analyse relationship among the skeletal and morphometric factors. RESULTS: According to the factor analysis, latent variables were extracted by each skeletal variable. First principal component (PC1) and PC2 of palatal morphology were used to analyse relationship with skeletal variables. As results of the structural equation model, the transverse latent variable had the most influence on PC1, followed by vertical and anteroposterior variables. This result means that as the facial width increases, the palate becomes narrower, deeper and longer. CONCLUSIONS: The relationship between the skeletal pattern with Class III malocclusion and palatal morphology was analysed through SEM. The transverse facial skeletal pattern showed the highest correlation with PC1 of palatal morphology.

Comparison of temporomandibular joint shape and size in patients with facial asymmetry.

OBJECTIVE: To examine the morphologic similarities and differences in mandibular condyle and glenoid fossa between the deviated and non-deviated sides in patients with facial asymmetry using statistical analysis. METHODS: One hundred eighty-four patients (95 men, 89 women; mean age, 22.30 ± 3.87 years) with facial asymmetry were examined with cone-beam computed tomography (CBCT). Shape analysis was performed to compare the shapes and sizes of the condyle and fossa between the deviated and non-deviated sides in the frontal and lateral aspects. Ordinary Procrustes analysis (OPA) was used to determine shape variations of the fossa and condyle. RESULTS: Shape variations derived from ordinary sum of squares (OSS) suggested that, in the frontal aspect, there was a difference between the two sides in both the fossa and condyle (P < 0.05). In the lateral aspect, there was no difference in fossa shape between the two sides (P > 0.05); however, the shape of condyle was different between the non-deviated and deviated sides (P < 0.05). Size comparison in OPA matching and centroid size (CS) in the frontal aspect demonstrated that the non-deviated side was larger than the deviated side. In the lateral aspect, fossa showed no difference in CS between the two sides (P > 0.05); however, the non-deviated side was larger than the deviated side for condyle (P < 0.05). CONCLUSIONS: Morphometric differences in condyle and fossa between the deviated and non-deviated sides were observed. Structures of the non-deviated side were relatively larger than those of the deviated side, except for fossa in the lateral aspect.

Orthognathic surgery induces genomewide changes longitudinally in DNA methylation in saliva.

OBJECTIVE: Orthognathic surgery dramatically changes morphology of the maxillofacial deformity and improves the malocclusion morphologically and functionally. We investigated the influence of orthognathic surgery on genomewide DNA methylation in saliva. METHODS: Saliva was obtained from nine patients undergoing orthognathic surgery and two healthy reference individuals before and 3 months after orthognathic surgery. Genomewide DNA methylation profiling of saliva (341,482 CpG dinucleotides) was conducted using Infinium HumanMethylation450 BeadChips. RESULTS: Comparison between pre- and postsurgery saliva samples revealed significant changes in DNA methylation patterns at 2,381 CpG sites (p < 0.01) with suggestive significance. The differentially methylated probe sets were significantly associated with the cancer pathway (p = 2.8 × 10-7 ; a false discovery rate q-value = 3.7 × 10-4 ) and PI3K-Akt signalling pathway (p = 2.4 × 10-5 ; a false discovery rate q-value = 3.1 × 10-2 ). CONCLUSION: Pathway enrichment analysis of genes with suggestive significance demonstrated that altered DNA methylation in saliva of patients undergoing orthognathic surgery, possibly as a response to surgical stress or bone injury. Further studies with a large sample size and long-term observation are needed to validate the phenomena identified in this study.

Autocrine regulation of mesenchymal progenitor cell fates orchestrates tooth eruption.

Formation of functional skeletal tissues requires highly organized steps of mesenchymal progenitor cell differentiation. The dental follicle (DF) surrounding the developing tooth harbors mesenchymal progenitor cells for various differentiated cells constituting the tooth root-bone interface and coordinates tooth eruption in a manner dependent on signaling by parathyroid hormone-related peptide (PTHrP) and the PTH/PTHrP receptor (PPR). However, the identity of mesenchymal progenitor cells in the DF and how they are regulated by PTHrP-PPR signaling remain unknown. Here, we show that the PTHrP-PPR autocrine signal maintains physiological cell fates of DF mesenchymal progenitor cells to establish the functional periodontal attachment apparatus and orchestrates tooth eruption. A single-cell RNA-seq analysis revealed cellular heterogeneity of PTHrP+ cells, wherein PTHrP+ DF subpopulations abundantly express PPR. Cell lineage analysis using tamoxifen-inducible PTHrP-creER mice revealed that PTHrP+ DF cells differentiate into cementoblasts on the acellular cementum, periodontal ligament cells, and alveolar cryptal bone osteoblasts during tooth root formation. PPR deficiency induced a cell fate shift of PTHrP+ DF mesenchymal progenitor cells to nonphysiological cementoblast-like cells precociously forming the cellular cementum on the root surface associated with up-regulation of Mef2c and matrix proteins, resulting in loss of the proper periodontal attachment apparatus and primary failure of tooth eruption, closely resembling human genetic conditions caused by PPR mutations. These findings reveal a unique mechanism whereby proper cell fates of mesenchymal progenitor cells are tightly maintained by an autocrine system mediated by PTHrP-PPR signaling to achieve functional formation of skeletal tissues.

Comparison of condylar size among different anteroposterior and vertical skeletal patterns using cone-beam computed tomography.

OBJECTIVES: To compare condylar size among different anteroposterior and vertical skeletal patterns using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: The study included 166 subjects (61 men, mean age: 27.2 ± 7.6 years; 105 women, mean age: 27.4 ± 9.2 years). The anteroposterior skeletal patterns of the subjects were classified into Classes I (-1° ≤ A point-nasion-B point angle [ANB] < 4°), II (ANB ≥ 4°), and III (ANB < -1°). The vertical skeletal patterns were classified into hypodivergent (mandibular plane [MP] ≤ 23°), normodivergent (23° < MP < 30°), and hyperdivergent (MP ≥ 30°) groups. The condylar length, height, and width were examined using CBCT images. Analysis of covariance was used to compare three condylar size measurements among the three anteroposterior groups and the three vertical groups using sex as a covariate. Both left and right sides were examined. Nine groups were further divided according to the anteroposterior and vertical groups, and two-way analysis of covariance (ANCOVA) was applied to estimate the composite effect of skeletal patterns in both directions. RESULTS: Sex as a covariate showed statistical significance in most examinations. The condylar height on both sides had statistically different anteroposterior skeletal patterns ( P < .001). The condylar width on both sides also had statistically different vertical skeletal patterns ( P < .001). After adjusting for sex, the condylar height and width on both sides increased from Class II, Class I, and Class III. The condylar width on both sides increased from the hypodivergent group, the normodivergent group, and the hyperdivergent group. No composite effect of skeletal patterns in both directions was observed. CONCLUSIONS: Condylar height and width considerably differed among subjects with different anteroposterior or vertical skeletal patterns. The anteroposterior or vertical skeletal patterns independently affected the condylar size.